Medical Silicone
The pain: odor, residual by-products and post-cure demands that medical OEMs and their auditors will not accept.
Our answer: platinum addition cure leaves no volatile by-products — parts exit the mold odor-free without exhaustive post-cure baking.
| Recommended system | G50A / G25B for extruded tubing · A3 / H350B for molded parts |
| Typical parts | Catheter tubing, seals, gaskets, valves, respirator components |
| Key requirements | Odor-free, high purity surface, clean tear trim |
Food Contact & Kitchenware
The pain: parts that pass at the factory but whiten after the water-boil or dishwasher test — the number one rejection cause in food-contact silicone.
Our answer: platinum curing for odor-free, peroxide-free parts, combined with FD-A6 anti-blooming agent and FD-68 internal release agent — the combination specifically formulated to survive water-boil testing.
| Recommended system | A3 / H350B + FD-A6 + FD-68 |
| Typical parts | Bakeware, spatulas, steamervalves, sealing gaskets |
| Key requirements | Water-boil resistance, no blooming, no odor |
Baby Care Products
The pain: the strictest odor, safety and surface requirements of any silicone market — plus brand owners demanding antibacterial claims that can be verified.
Our answer: odor-free platinum curing with clean tear trimming, and optional FD-05 antibacterial agent with ISO 22196-tested results (99.9% against E. coli and S. aureus in finished parts).
| Recommended system | A3 / H350B + FD-68, optionally + FD-05 |
| Typical parts | Nipples, teethers, tableware, placemats |
| Key requirements | Odor-free, easy demolding, verified hygiene claims |
Industrial Seals & Gaskets
The pain: flash and demolding problems eating cycle time; compression-set and ageing failures in the field.
Our answer: A3 / H350B for fast, clean molding with easy tear trim; FD-68 for demolding and improved ageing resistance; W-8630 spray for difficult tools — without affecting any downstream bonding or coating.
| Recommended system | A3 / H350B + FD-68, W-8630 for the tool |
| Typical parts | O-rings, gaskets, dampers, diaphragms |
| Key requirements | Cycle time, clean flash removal, ageing resistance |
Electronics & Cable
The pain: peroxide residues corroding contacts; yellowing white keypads after UV exposure; bubbles in insulation extrusion.
Our answer: G50A / G25B for high-clarity, bubble-free extrusion of insulation profiles and sleeving; A3 / H350B for keypads and connectors — no corrosive by-products, high anti-yellowing.
| Recommended system | G50A / G25B for extrusion · A3 / H350B for molded parts |
| Typical parts | Wire insulation, sleeving, keypads, connector seals |
| Key requirements | No corrosive residues, clarity, anti-yellowing |
Your Application Not Listed?
If it involves HTV silicone rubber, we most likely have a formulation for it. Describe your process and part — we will answer with a concrete recommendation.
Ask Our Engineers