Platinum-Cure Silicone Additives, Engineered for Zero-Defect Parts
Platinum vulcanizing agents, anti-blooming agents and mold release systems for HTV silicone rubber extrusion and compression molding — odor-free curing, backed by English-language technical support.
- No post-cure bake
- Odor-free parts
- No blooming after water-boil
Built for Factories That Cannot Afford Defects
Blooming, yellowing, bubbles and mold sticking are not “quality issues” — they are formulation issues. Our additive systems are selected and dosed to eliminate them.
Cure faster, skip the post-cure oven
Addition-cure systems leave no peroxide by-products — parts come out odor-free with no secondary baking, cutting oven time and energy cost.
Food-contact applications
Platinum systems are the standard route to food-contact silicone. Compliance documentation is available on request.
Stable production windows
Our molding grade compound stays workable for 10+ days at room temperature — no refrigeration, flexible production scheduling.
One Supplier, the Full Additive Package
Six focused products covering curing, blooming control, mold release and antibacterial performance — sourced from one specialized manufacturer, documented in one place.
Extrusion Grade G50A / G25B
Two-part platinum vulcanizing agent for extruded silicone tube, profile and cord. Non-sticky to steel belts, high clarity, no white spots or bubbles.
View product → Platinum Cure SystemMolding Grade A3 / H350B
Two-part platinum vulcanizing agent for compression-molded parts: keys, seals, kitchenware and baby products. 10+ days pot life at room temperature.
View product → Processing AdditiveAnti-Blooming Agent FD-A6
Permanent control of blooming and whitening in colored silicone — survives water-boil testing without affecting physical properties.
View product → Processing AdditiveMold Release Agents FD-68 / W-8630
Food-grade internal release agent and water-based external release agent. Clean demolding, no sticking to rollers, no blooming after water-boil.
View products → Performance AdditiveAntibacterial Agent FD-05
For silicone products where hygiene sells: tested at 99.9% antibacterial rate against E. coli and S. aureus in finished silicone parts (ISO 22196).
View product →Not sure which system you need?
Start with our platinum vs. peroxide comparison, or send us your process — we will recommend a formulation.
Compare curing systems →Where Our Additives Work
Industry estimates put around 63% of platinum-cured silicone demand in medical and food-contact applications — exactly what our product line is built for.
Real Factory, Real Process — On Camera
Every batch is produced in a dedicated platinum-cure workshop with isolated material handling. Video walkthroughs of our facility are being prepared.
Photos and video of the R&D lab, production, packing and warehousing will be added here — layout is reserved and ready.
Documentation Buyers Actually Ask For
We know what your customers and auditors request — because we prepare for it. Every inquiry is supported with technical data sheets, safety data sheets and compliance documentation.
- TDS & MSDS for every product (English, on request)
- Batch certificates aligned with shipment documentation
- Formulations manufactured to meet REACH, RoHS and PAHs requirements — documentation available on request
- ISO 22196 antibacterial test report for FD-05-treated silicone parts — available on request
Technical Support in English, From Day One
Most additive suppliers ship drums and disappear. We stay through trial runs, dosing calibration and troubleshooting.
Pre-sale process review
Send us your compound type, hardness and process. We recommend the grade, dosage table and mixing order before you commit to a trial.
Trial support
Free samples (shipping on you) with recommended processing windows. Guidance on addition order, temperatures and pot-life management during your trial runs.
Troubleshooting
Under-cure, blooming, yellowing, sticking — see our technical guide for causes and fixes, or contact our engineers directly.
Start With a Sample, Not a Contract
Tell us what you produce and what problems you are fighting. We will send the right grade with a dosing recommendation — free of charge.
Request a Free Sample Talk to an Engineer